- Block & Head Gasket
- Stops Leaks
- Stops Noise
- Stops Smoking
- Seals Cracked Heads
- Repairs Blown Head Gaskets
- Stops Block Leaks
- Cooling Stop Leak
No, you must first drain and flush the entire cooling system, including the overflow tank and refill with water. All antifreeze must be removed from cooling system or clogging could occur.
This product contains a special sodium silicate (liquid glass) and this is not compatible with antifreeze.
After using this product, flush entire cooling system with water before adding antifreeze.
For best results, leave the cooling system open for 12 hours after draining the product from the cooling system.
This patent pending repair contains a blend of aramid and refractory fibers giving the strength of a bullet-proof vest and the heat resistance of fire-proof clothing. As these particles penetrate a crack or the blown head gasket area, they lock together and bond forming a hard permanent ceramic type seal.
4 L to 7 L cooling capacity uses ½ bottle.
7,1 L to 22 L cooling capacity uses 1 bottle.
Larger systems use 1 bottle for every 19 L of coolant capacity.
Rislone Head Gasket is only designed to be added to the cooling system. If the product is installed in the gas tank, the tank should be removed and cleaned out by a professional mechanic.
Rislone Head Gasket Repair is only designed to be added to the cooling system. If the product is installed in the engine oil and the engine has not been started, in many cases you can remove the valve cover and drain the oil leaving the drain plug off. Then use an engine flush washing out the head keeping special attention to the oil return holes that run down to the oil pan. Clean these out and pour the engine flush down these holes flushing everything into the oil pan and out the drain hole. If the engine has been run, you need to take the vehicle to have a professional mechanic evaluate what can be done to clean the inside of the engine. This might include taking the engine apart to clean all of the parts.
Starting your car and noticing your temperature gauge spring towards the high end is not the best way to start your busy day. School, work, errands — your daily routine should not be compromised due to head gasket problems. Our Rislone Head Gasket Repair is scientifically formulated to permanently seal coolant leaks that are the cause of most overheating problems.
Overheating can be caused by a blown head gasket, cracked head or a leaking block. Rislone Head Gasket Repair eliminates this problem — guaranteed. This product contains a blend of aramid and refractory fibers, which provide the strength of a bulletproof vest and the heat resistance of fireproof clothing. As these particles penetrate a crack or the blown head gasket area, they lock together and bond, forming a hard permanent ceramic-type seal.
Forget that nasty repair bill. Simply use this product and get back on the road and back to your daily routine in no time — with several thousand extra pesos in your pocket.