- Cooling System
- Stops Leaks
- Stops & Seals Coolant Leaks
- Works with Any Color Antifreeze
- Stops Leaks and Drips from Wear and Age
Yes, Rislone works with all types and colours of antifreeze coolant and / or water.
Yes, Rislone Radiator Stop Leak works with all types and colours of antifreeze coolant and/or water.
No, this product is designed to be left in the cooling system to protect from future leaks and overheating.
We recommend you drive / idle the vehicle for 15 to 30 minutes. In most cases the leak will be sealed instantly, but others will require up to 30 minutes. If the leak is not sealed in 30 minutes, a second application may be required, or mechanical repair may be needed.
No, Rislone® Radiator Stop Leak will not clog a clean heater core. Note: If using Rislone® to stop heater core leaks, make sure you turn your heater control to HOT. Some vehicles have a valve that controls coolant flow through the core and is only opened in the HOT position.
Passenger cars and light trucks—Use one bottle for 4 cylinders and two bottles for 6 & 8 cylinder engines. For larger systems use one bottle for every 8 liters of coolant capacity. Small engines or other small systems use approximately 20 mL per liter of fluid capacity.
Yes, if direct access to the radiator cap is not available, install in overflow tank.
Rislone is only designed to be added to the cooling system. If the product is installed in the engine oil and the engine has not been started, in many cases you can remove the valve cover and drain the oil leaving the drain plug off. Then use an engine flush washing out the head keeping special attention to the oil return holes that run down to the oil pan. Clean these out and pour the engine flush down these holes flushing everything into the oil pan and out the drain hole. If the engine has been run, you need to take the vehicle to have a professional mechanic evaluate what can be done to clean the inside of the engine. This might include taking the engine apart to clean all of the parts.
Noticing a puddle of fluid under your car is never a good way to start your day. What you need is a safe and easy way to stop that leak so you can get on with your day as planned. Our Rislone Radiator Stop Leak will do just that.
This product is specially designed to stop minor cooling system leaks and drips caused by normal cooling system wear and age. It works with ALL types and colors of antifreeze coolant and/or water.
Before you know it, you’ll stop that leak and get your car back on the road. Yes, you. No mechanic required.