- Stops Leaks
- Stops Noise
- Eliminates Slipping
- Repairs Hard Shifting
- Stops Leaks and Fluid Loss
- Use in Automatic & Manual Transmissions
Rislone Transmission Stop Slip with Leak Repair contains a special blend of viscosity improvers, anti-wear friction modifiers and extreme pressure performance additives to solve most transmission problems. These additives reduce rough shifting and friction, while eliminating slip, controlling temperature, and repairing shudder, chatter and whining.
Depending on the transmission problem, results will either be immediate or noticeable within a few days of driving.
Yes, for severe problems or badly worn transmissions, use double the dosage or a second bottle.
Yes, it works with any front wheel drive, rear wheel drive, all-wheel drive and four wheel drive transmissions. Do not use in CVT transmissions. Use in ALL light duty and heavy duty vehicles including; car, truck, van, Utes, SUV, and RV’s with any 3 speed, 4 speed, 5 speed, 6 speed, electronic, overdrive, automatic or manual transmission. On manual transmissions it will only help with leaks, noise and hard or loose shifting, but not slipping.
Yes, it is compatible with ALL types of domestic and import transmission fluid; including petroleum and synthetic formulas.
The 946 mL Rislone Transmission Stop Slip with Leak Repair, part number 44502, is designed to treat 11 to 15 liters of transmission fluid. For compact and smaller vehicles, use ½ of the bottle.
Yes, the Rislone Transmission Stop Slip with Leak Repair will work in manual / standard “stick” transmissions to top off the fluid level to stop leaks, noise and grinding gears.
Yes, remove transmission dipstick and check fluid level. For most vehicles this is usually done while the engine is running and the transmission is in park. Tip: The transmission dipstick is usually located near the engine oil dipstick but further back into the engine compartment. Some vehicles do not have a normal dipstick. For those, the product has to be added to the transmission through a fill plug. Consult owner’s manual for location. If fluid is low, pour entire contents of the bottle into the dipstick tube. Do NOT overfill. For compact and smaller vehicles, use ½ of the bottle. Tip. If necessary, to prevent overfill, drain some fluid from transmission. Check fluid level again. Top off with manufacturer’s recommended transmission fluids as needed. Replace dipstick and drive 10 to 15 minutes to circulate fluid.
No, the product is completely safe to use and will not harm any part of the transmission system.
You know how our bodies can’t function correctly without the proper amount of fluids? Well, the same is true for your car. Automatic transmissions don’t work without fluid, nor do they work well without the correct fluid. And did we mention these fluids are one of the most complex lubricants in your car’s system? Automatic Transmission Fluid has to reduce friction enough to prevent wear and control temperature while at the same time allowing some friction to prevent the internal clutch material from slipping. Yeah, it works hard. Crazy hard. That’s why we created the Rislone Transmission Stop Slip with Leak Repair.
This product contains a special blend of viscosity improvers, anti-wear friction modifiers and extreme pressure performance additives to solve most transmission problems. These additives reduce rough shifting and friction, while eliminating slip, controlling temperature, and repairing shudder, chatter and whining.
Your car, like your body, works hard to keep you going. Reward it by feeding it the good stuff. Simply watch Bobby and Caitlin in our how-to video and give your overworked transmission fluid that well deserved drink.