Liquid Aluminum Cooling System Stop Leak

0 Customer Ratings (Write A Review)
What it's for:
  • Cooling System
What it does:
  • Stops Leaks
  • Repairs
  • Safe to Use and Seals Instantly
  • Stops Coolant Leaks, Guaranteed
  • Contains Xtreme Cool
  • Stops Overheating and Reduces Temperature
  • Can Rislone® Liquid Aluminum™ be installed in existing antifreeze coolant?

    Yes, Liquid Aluminum™ is specifically designed to be directly added to the cooling system without having to flush out the antifreeze. It also can be used in water alone. But if using in water, it is recommended that another bottle of Liquid Aluminum™ be added to the system once antifreeze is installed.

  • Will it work in the new extended life antifreeze?

    Yes, Liquid Aluminum™ is compatible with both conventional, green or blue (silicate-based) and extended life red/orange or yellow (OAT/HOAT) antifreeze.

  • Do I need to drain my cooling system after using Liquid Aluminum™?

    No, this product is designed to be left in the cooling system to protect from future leaks and overheating.

  • How long does it take to see results?

    We recommend you drive/idle the vehicle for 10 to 20 minutes. In most cases the leak will be sealed instantly, but others will require up to 20 minutes. If the leak is not sealed in 20 minutes, a second application may be required or mechanical repair may be needed.

  • Will Liquid Aluminum™ plug my heater core?

    No, Rislone® Liquid Aluminum™ Cooling System / Radiator Stop Leak product is part of the next generation stop leak line which is certified to be used in all cooling system types. It is guaranteed to safely and easily seal leaks in plastic, aluminum and metal (copper / steel) radiators, heater cores, gaskets and freeze plugs. Note: If using Rislone® to stop heater core leaks, make sure you turn your heater control to HOT. Some vehicles have a valve that controls coolant flow through the core and is only opened in the HOT position.

  • What are the dosage recommendations?

    Use 1 (one) bottle for regular size cooling systems, this covers most 4, 6, 8 and 10 cylinder engines. For small cooling systems, such as 4 cylinders with no air conditioning, install ½ (half) of bottle. For larger systems, use 1 (one) bottle for every 15 litres of cooling system capacity.

  • How does Xtreme Cool™ make the vehicle run cooler?

    The Xtreme Cool™ additive in Liquid Aluminum™ reduces the surface tension of coolant increasing the wetting ability. This improves heat transfer reducing coolant temperature helping to prevent overheating and leaks.

  • Can I install Liquid Aluminum™ in my overflow reservoir?

    Yes, if direct access to the radiator cap is not available, install in overflow tank.

  • Will this work in both domestic and import cars and trucks?

    Yes, Liquid Aluminum™ will work in all types of water cooled vehicles.

  • I accidently added the Liquid Aluminum™ into my gas tank, what should I do?

    Liquid Aluminum™ is only designed to be added to the cooling system. If the product is accidently installed in the gas tank, the tank should be removed and cleaned out by a professional mechanic.

  • I accidently added the Liquid Aluminum™ into my engine oil, what should I do?

    If the product is accidently installed in the engine oil and the engine has not been started, in many cases you can remove the valve cover where installed and drain the oil leaving the drain plug off. Then use an engine flush washing out the head giving special attention to the oil return holes that run down to the oil pan. Clean these out and pour the engine flush down these holes flushing everything into the oil pan and out the drain hole. If the engine has been run, the vehicle needs to be towed to a professional mechanic for evaluation. This might include taking the engine apart to clean all of the internal parts.

Does a coolant leak set you into a panic? When most of us see coolant on the ground, we start to see dollar signs, or immediately wonder how life is going to be with a car in the shop. You need to have your car towed to a garage or dealership, inspected by a mechanic, and replace a bunch of costly components. Thankfully, that’s not the only solution.

Here at Rislone, we have been taking care of engine fluid leaks and performance issues for over 95 years – especially when it comes to cooling systems. Our proven Rislone Liquid Aluminum Cooling System Stop Leak product makes quick work of sealing radiator and cooling system leaks to get you back on the road with little expense – and with minimal time invested.

In many cases, a single application of our advanced engine coolant antifreeze stop leak is all it takes to seal your leaks for good. At the first sign of a leak, it’s important to act (leaks never get better being left alone). In fact, It’s our experience that leaving a coolant leak unaddressed for too long can make matters much worse. If your coolant level gets too low, your engine can overheat and you risk doing permanent damage that can only be repaired with a full engine overhaul, or sometimes a replacement if the damage is bad enough. That means massive cost.

But there is a proven, award-winning alternative with hundreds of thousands of bottles sold: simply add Rislone’s Liquid Aluminum Cooling System Stop Leak to your radiator or overflow tank and watch your leaks disappear. It’s literally that simple.

While it might seem a bit too easy, our products are the result of years of advanced research and engineering. We use unique formulations to detect and seal leaks for good at a fraction of the price of physically replacing seals and other leaking components. In most cases, a single application is all it takes to stop your leaks. Rislone Liquid Aluminum Cooling System Stop Leak can also be used as a preventative maintenance product to ensure that leaks don’t occur – it’s safe, effective and will not clog or otherwise cause any problems with your engine. This is especially reassuring if you are heading out on a long trip or carrying a lot of weight and taxing your cooling system.

Many older vehicles get taken off the road long before they need to be, simply because the owners fear big repair bills. A coolant leak may seem like a major problem, but when you see how easy it is to seal your leaks with our industry-leading radiator and heater core stop leak formulations, you will see why more and more Canadians are extending the life of their vehicles with our help. Even those of you who have zero automotive repair experience can stop your cooling system leaks with our Liquid Aluminum Cooling System Stop Leak. You avoid the hassle and expense of going to a mechanic and can get back on the road right away. We know you have a life. Don’t let cooling system repair issues keep you sidelined.

Bottom line: start paying attention to your vehicle’s cooling system. If you detect any problems (a coolant leak, low coolant level, engine overheating light on the dash, lack of heat through your vents), make sure you have a bottle of Liquid Aluminum Cooling System Stop Leak ready to go.

Don’t let your your cooling system keep you from what’s important – trust Rislone’s time-proven products and enjoy many more kilometers of trouble-free driving. And if you have questions, don’t hestitate to contact us – we’re always happy to help.

Part Number: 31186
Dosage: Use 1 (one) bottle for 6, 8 and 10 cylinder engines. Add ½ bottle for 4 cylinder engines. For larger systems, use 1 bottle for every 12 liters of cooling system capacity.
Size: 500 mL
Rating:
  • Unknown -