- Stops Leaks
- Stops Noise
- Stops All Oil Leaks
- Seals Rear Main, Cam Seal and Timing Cover Leaks
- Restores Shrunk and Hardened Seals
- Use in Gasoline & Diesel Engines
The simple answer is: A seal that fits around the rear of the crankshaft to prevent oil leakage.
The more in depth answer is:
A rear main seal, also known as a main seal or rear main bearing seal is located between the engine and transmission. The crankshaft (the internal engine part that the pistons are connected to) sticks out of the rear of the engine, and the flywheel & transmission bolt to this crankshaft. The engine oil lubricates the crankshaft, pistons and other internal parts of the engine. The rear main seal is inserted into the back of the block and fits snuggly around the rear of the crankshaft and keeps the engine oil from escaping.
Depending on the severity of the leak the first thing you may notice is the oil level going down. The next thing that happens is spotting, where you will find oil spots, located on the driveway or garage. While looking under the vehicle around the area where the engine and transmission connect, you will find oil dripping, or an oil residue with dirt caked on this part of the vehicle, most noticeably under the oil pan and the front of the transmission. In some transmissions, it will actually be the oil leaking out of the front of the transmission. In some manual transmission vehicles, you may also notice some slipping of the clutch, which can occur with a leaking rear main seal.
The most common cause of rear seal leaks is age and/or high mileage. The seal can also leak due to the vehicle being stored for an extended period of time, or from running the engine low on oil. This causes drying and hardening of the seal leading to shrinking, cracking and tearing of the rear main seal.
A few things can cause a rear main seal leak to worsen, which are not the fault of the seal itself. If the oil level is two high (filled over the full mark) or the PCV (Positive Crankcase Ventilation) system is not functioning correctly, leaks can occur. The PCV system prevents pressure from building up inside the engine and if it fails, the pressure will cause the oil to leak out. It is a good idea to clean or replace the PCV valve regularly to prevent this problem.
For most rear wheel drive vehicles the transmission is removed to replace the seal. On front wheel drive vehicles, it is usually easiest to remove the engine to gain access to replacing the seal. Either way, this is an expensive procedure.
Rislone Rear Main Seal Repair is one of the only products of its kind on the market specifically
designed to solve rear seal oil leaking problems. There are special oil additives on the market that are designed to swell the rubber of the rear seal and cause it to expand, thus sealing off the leak. You can also try using thicker weight engine oil, like 50 weight. The thicker oil can fill in the gap between the seal and the crankshaft, and could slow the leak down.
This product works in two ways to help solve most any seal type leak. 1) The seal restorer additive restores seal size, flexibility and elasticity lost due to engine heat, age and high mileage.
2) The seal polymer works by building a polymeric film around the rear main seal and also filling in any groove worn into the crankshaft by the seal.
Because of the Rislone 2X Action formula, the product has additives to work on any of the three types of rear main seals, no matter what the material.
(3 basic styles)
– Also called a wick seal
TWO PIECE SEAL
– Neoprene or called rubber
ONE PIECE SEAL
– Neoprene or called rubber
– NBR or Buna N (Nitrile)
– PA or Polyacrylate
– Viton or Fluoroelastomer
No. Unlike our cooling system products, Rislone Rear Main Seal Repair has no particles to plug the leak. It contains special polymers and seal conditioners to stop seal leaks.
Have you noticed oil leaking from your car lately? That might be due to worn or dried seals. There’s no need to worry or spend your money on a costly repair bill, however. Our Rislone Concentrated Rear Main Seal Repair quickly and safely restores those seals so you can get back on the road and back to your life.
Most rear main seal leaks are caused by a combination of normal wear in the crankshaft and seal and the drying, hardening and shrinking of the main seal. Rislone Concentrated Rear Main Seal Repair restores the seal to like-new condition and also contains additives to stop leaks in severely worn seals and crankshafts. Not to mention, it works with ALL gasoline and diesel engines using conventional, high kilometer and synthetic oil.
You can trust that our products are the fastest, safest way to get your car back on the road — we’ve been proving that since 1921. Give Rislone a shot and avoid that dreaded trip to the repair shop once and for all.