- Cooling System
- Reduces Engine Temperature
- Prevents Overheating
- Provides Maximum Corrosion Protection
No, Super Coolant is formulated for use with straight water and will provide maximum corrosion protection.
Super Coolant is compatible with all types and colors of glycol/water-based coolants including yellow, orange, pink, red, purple, blue, green regular silicate & non-silicate and extended life antifreeze. It also works great in systems containing only water. Because Super Coolant is water based, do not use with Evan’s waterless antifreeze.
Yes, you can get improved cooling and lower temperatures by adding additional water to your system. Keep in mind that you will not maintain the same freeze protection when you increase the percentage of water in the system. But if you live in a warm climate area and you change the mix to around 35% Antifreeze and 65% water you will still receive freeze protection down to 0°F. For most racing applications it is beneficial, and many times required to run 100% water in the cooling system and this with Super Coolant gives you the best cooling heat transfer.
Yes, you can. It will provide the same temperature reduction performance and corrosion protection in a diesel engine as gasoline. Adjust dosage as needed for larger cooling system size.
Use one 16-ounce bottle of Super Coolant, part number HPC100, to treat 12 to 20 quart systems. For larger and smaller systems add 1 ounce per quart (4 ounces per gallon) of capacity.
Never remove radiator cap when engine is hot. With engine off and cool, remove radiator cap and add contents of bottle. Reinstall cap and drive vehicle normally.
If you do not have direct access to your radiator, Super Coolant can be installed in the overflow tank. It will take 4 to 5 heating and cooling cycles for product to fully enter the system using this method.
Usually the easiest way is removing some fluid from the system by using a coolant tester or old turkey baster to suck some fluid out. You can also open the drain on the bottom of radiator to remove enough fluid to add Super Coolant.
For best results and protection, we recommend treating the cooling system once per year, and every time changing coolant.
In systems running a 50/50 antifreeze water blend you can expect a 6 to 8 degree Fahrenheit cooling temperature reduction. If using straight water, you can get up to a 30° F reduction. Cooling system temperature minimum is controlled by the thermostat, so if the vehicle is already running at the minimum, you will not see any reduction below that. But when towing, under load, racing or working the cooling system harder, this is where the reduction will be shown.
The hottest area of the cooling system, and the engine itself, is around the combustion chamber and exhaust port. The metal is extremely hot and coolant is so hot that it can boil and create air bubbles which insulate the coolant from the metal, causing even more heat. Super Coolant reduces the temperature in this area up to 75°F which allows the engine to run more efficiently, reduces potential spark knock, allows timing to be advanced, and creates more power and torque.
Scale & deposits in the cooling system from hard water, and glycol dropout from old antifreeze can build up on the interior surfaces, and even plug coolant passages. Even a small amount of scale 1/16th inch thick can reduce heat transfer by 40%. Other causes include performance vehicles with larger engines which don’t have a large enough cooling system, towing over the rating of the vehicle, and mechanical problems like a bad water pump impellor.
Yes, one of the number one uses for Super Coolant is in racing vehicles, including drag racing, oval track, off road, monster trucks and many other motorsports events. Many racing series and tracks require that no glycol is put into the cooling system because once that leaks on the track it becomes very slippery and dangerous. Super Coolant does not contain glycol.
No, the cooling system does not need to be flushed before using. But if the system is dirty you will receive the maximum benefit of the product by completely cleaning the system first.
Yes, Super Coolant works equally well with extended life coolants.
When you push your engine to the limit, high heat and mechanical stress become severe problems. An effective engine coolant additive helps more efficiently transfer heat to keep cylinder heads cool and reduce the likelihood of detonation, power loss and damage. When you’re in the market for a reliable way to eliminate overheating issues and extend the life of your engine, Hy-per Cool by Rislone Super Coolant is a race-proven, effective solution that’s applicable to any car and driving situation.
Hy-per Cool by Rislone is a leading source of high-end, stress-tested lubricants, coolant treatments and fuel system cleaners for a broad range of consumers throughout the United States and Canada. Super Coolant is the most proven engine coolant system additive on the market, used everywhere from the racetrack and off-road recreation to general daily-driving consumers who expect the best. Our tried-and-true formula has been tested and proven in the harshest operating conditions and is backed by empirical lab results demonstrating the ability to significantly lower cylinder head temperatures.
We call on 60 years of chemical innovation and industry experience to deliver an engine coolant additive that protects all types of metals found in cooling systems, including aluminum, from rust, electrolysis and corrosion. Hy-per Cool by Rislone Super Coolant is effective in straight water applications where there is an absence of protection provided by the antifreeze corrosion inhibitors. Safe for use in gasoline and diesel vehicles, you benefit from a coolant system additive that:
We’re confident our high-performance engine coolant is the most effective solution on the market. Important facts about Super Coolant include:
Note: When running Hy-per Cool by Rislone Super Coolant with straight water or antifreeze/water mix, we recommend using softened tap water or bottled drinking water.
Independent dyno tests prove that Hy-per Cool by Rislone Super Coolant reduces engine temperatures by up to 25°F.
When you care more about what you put in your engine than the price tag or empty promises printed on the bottle, Rislone offers premium solutions that fit your budget and exceed expectations. All of our high-performance, industry-proven products are formulated and made in the U.S.A and engineered to stand up to high stresses and demanding challenges. We’re the brand of choice for race teams, off-roaders and those in industrial applications who value the quality of our products and experience of our team.
Put your trust in products from a family-owned business that strives to build long-term relationships by offering exceptional quality and superior results. Contact us today to request assistance and technical support from a member of our Michigan-based customer support team.
Be the first to leave a review for this product.