Phone: 1-800-345-6572 International

Nano Prime™ Engine + Oil Performance Booster

Home » Nano Prime™ Engine + Oil Performance Booster

5 Customer Ratings (Write A Review)

Rislone Nano Prime was years in the making – literally. With customers clamoring for a fully-synthetic Rislone engine + oil treatment, we took our time in research and development to bring you the most advanced engine treatment we have made – ever.

We think the results speak for themselves. See overview tab below for more information.

What it's for:
  • engine
What it does:
  • Lubricates
  • Performance
  • Repairs
  • Cleans
  • Features MoS₂ with WS₂ Nano Technology
  • Increases Horsepower & Torque
  • Reduces Engine Friction, Heat & Wear
  • Repairs by Filling & Coating Rough and Worn Metal Surfaces
  • Cleans & Prevents Sludge

Buy Online

Buy on Amazon U.S.
Buy on Walmart.com

See What Our Customers Are Saying

“I poured this into the crankcase of my Ford ZX2 coupe just the other day. They aren’t known for having the quietest or smoothest of 4 cylinder engines to begin with, and I wanted to get a little more protection and detergency out my motor oil. Within only a few minutes of driving, the engine was noticeably smoother and quieter, and even the typical noisy chatter of the DOHC had died down. There is also less hesitation from throttle input. I’m in awe already, and can’t wait to see further improvements down the road!” - Ryan S. - Oklahoma

FAQ
  • What is Rislone Nano Prime Engine & Oil Additive?

    Rislone Nano Prime Engine & Oil Additive is a synthetic engine antifriction lubricant to help better protect internal engine components including pistons, flat tappet camshafts, lifters, valvetrain and all other parts. This is especially important at engine start up, when most wear is done. That is why they say one of the worst things you can do is start your engine.

  • Why do I need an Engine & Oil Additive?

    Engine oils have become very thin, almost as thin as water. This is in response to government mandates for increased mpg requirements, not to better lubricate the engine. This along with newer start stop technology will increase wear, and decrease the longevity of your engine. Using Rislone Nano Prime Engine & Oil Additive will reduce this wear and increase the life of the engine.

  • How does Rislone Nano Prime Engine & Oil Additive work?

    The common element between all the engine components is the oil. Oil is the life-blood of the engine and is pumped under pressure to the internal parts. Engine oils are generally used to reduce friction between moving parts. In addition to lubricating, motor oil must cool, provide corrosion protection and be a method of removing contaminants. The main parts needing oil for lubrication is the valvetrain including the camshaft & lifters, bearings and pistons. When installed, Rislone Nano Prime Engine & Oil Additive reduces friction which helps cool and lubricates these moving parts better than oil alone. The clinging properties hold the oil to metal parts preventing wear and dry starts. Special additives also prevent oil thinning at high temperatures where normal oil fails. The Nano Tungsten spheres creates the sacrificial (disposable) layer on any component where metal to metal contact happens preventing the metal itself from being worn away. These spheres contain many layers, sort of like an onion. When put under pressure they can shed these Nano thin layers instead of that happening to internal engine parts. They fill and smooth rough and scratched surfaces.

  • What is a Nano?

    The International System of Units states that Nano is a “prefix” that means one Billionth. A nanometer is one-billionth of a meter, for comparison a sheet of paper is 100,000 nanometers thick. These are exceptionally small particles allowing the oil to become a super lubricant.

  • How much Rislone Nano Prime Engine & Oil Additive do I install?

    One bottle of Rislone Nano Prime Engine & Oil Additive is formulated to treat 4.5 to 7 quarts of oil for regular vehicles. For larger engines use one bottle for every 6 quarts of capacity. On 4-stroke ATV, motorcycle and other small engines, use approximately 3 ounces per quart of oil. Do NOT use in wet clutch applications, as this formula is too effective in reducing friction.

  • Will Rislone Nano Prime Engine & Oil Additive clog my filters?

    No, this product will not clog your filters. Nano’s are smaller nearly 1000 times smaller than a single strand of hair, they will pass through your filters without a problem.

  • Does Rislone contain chlorine or any chlorine like additives?

    No, Rislone does not condone or produce any engine additive products with chlorine. We are aware of other additive companies which use chlorine and it shows to reduce wear in laboratory testing, but can do damage to engine bearings and other components in real world use.

  • How long does it take to start working?

    Rislone Nano Prime Engine & Oil Additive starts working the minute you install and start driving the vehicle to protect internal engine parts from damaging wear.

  • Can I use Rislone Nano Prime Engine & Oil Additive in my newer vehicle?

    Yes, this formulation is designed to work equally well in new and older engines. Not only will you have a better lubricated & protected engine, but the product contains the tried and true Rislone detergent & dispersant cleaning package that help found the brand. Use of Rislone will not void your new car warranty.

  • Will it work in synthetic oil?

    Yes, this unique Rislone formulation uses a fully formulated GF-5 / SN rated synthetic motor oil that is compatible for all vehicles.

  • Can it be used with regular petroleum motor oil?

    Yes, Rislone works with all petroleum-based motor oils including conventional, high mileage and synthetic formulas. In fact, Rislone Nano Prime Engine & Oil Additive will turn regular petroleum oil into a premium synthetic blend.

  • When should I add to my engine?

    May be used anytime, at or between oil changes.

  • Will Rislone Nano Prime Engine & Oil Additive effect my oil grade?

    No, this product will not change the grade of your oil.

  • How long does Rislone Nano Prime Engine & Oil Additive last?

    When used in combination with a good quality motor oil, Rislone Nano Prime Engine & Oil Additive is designed to be used once per year, or with every other oil change.

  • Can I use Rislone Nano Prime Engine & Oil Additive in my diesel engine?

    Yes, it is recommended to use one bottle for every 6 quarts of oil capacity.

Overview

Rislone Nano Prime was years in the making – literally. With customers clamoring for a fully-synthetic Rislone engine + oil treatment, we took our time in research and development to bring you the most advanced engine treatment we have made – ever.

We think the results speak for themselves.

With patented nanotechnology in a fully synthetic oil that massively reduces friction and grants long-term protection to metal in even the most demanding applications (racing, off-road driving, high-stress/high-temp commercial duty, stop & go traffic, etc.), Rislone Nano Prime is what you’ve been waiting for.

Fully synthetic Rislone Nano Prime – more power, more protection, better MPG, smoother and quieter operation. With almost 100 years in the performance chemical business, we’ve learned a thing or two.

And put it in this bottle.

Part Number: 4104
Dosage: One bottle treats 4.5 to 7 quarts of oil for regular vehicles.
Size: 16.9 FL OZ
Testimonials

Leave a Review

Rating:

  • “Added to QS conventional oil in one of my works 2005 Ford Explorer w/4.0 SOHC V6 Two long timing chains. After a few hundred miles engine in noticeably smoother and quieter. Fuel mileage over 1,000+ miles is well over 1 MPG more. Bought more for my other vehicles.”

    Kenneth - Huntington Beach, CA

  • “Tried it and it works GREAT to quiet my engine down, will check to see if it helps my mileage.”

    Francis S. - MJ, CA

  • “Started out using in my mowers with great results, so I started using this product in my older vehicles. My work truck sounds quieter and seems to run smoother.”

    James S. - TN

  • “Used Nano Prime in two of my trucks and both seemed punchier and and a bit easier on gas. Would recommend.”

    Big Ed Mustafa - The Bottoms (Ohio)

  • “I poured this into the crankcase of my Ford ZX2 coupe just the other day. They aren’t known for having the quietest or smoothest of 4 cylinder engines to begin with, and I wanted to get a little more protection and detergency out my motor oil. Within only a few minutes of driving, the engine was noticeably smoother and quieter, and even the typical noisy chatter of the DOHC had died down. There is also less hesitation from throttle input. I’m in awe already, and can’t wait to see further improvements down the road!”

    Ryan S. - Oklahoma
SDS/Technical Information